分根法研究镧对水稻生长及其生理参数的影响

用分根营养液培养法研究了镧对水稻生长及其促进作用的生理机制。结果表明:低浓度镧(0 05～1 5mg·L-1)提高水稻产量,增加实粒数;随着镧浓度从0 05增加到0 75mg·L-1,镧降低第一片完全展开叶和根中过氧化氢酶(CAT)活性;当镧浓度为0 75～9mg·L-1时,镧显著降低叶和根中超氧化歧化酶(SOD)活性;0 75mg·L-1镧增加叶中赤霉素(GA)和吲哚乙酸(IAA)含量,0 75和3mg·L-1镧增加根中细胞分裂素(iPAs)和IAA含量,但降低脱落酸(ABA)含量;秧苗移栽后46d,0 25～6mg·L-1镧显著增加叶片气孔导度;秧苗移栽后59和83d,当镧浓度分别为15和6mg·L-1时,镧显著降低叶片气孔导度;镧对叶片叶绿素(Chl)含量、叶和根中蛋白质,脂质过氧化产物丙二醛(MDA)含量没有发现显著作用。还讨论了镧促进水稻生长和消除超氧阴离子(·O2-)的可能机制。     

RATE OF INTRA-MOLECULAR CONTACT FORMATION IN SHORT TWO-DIMENSIONAL COMPACT POLYMERS CHAINS

It is important to know the rate of intra-molecular contact formation in proteins in order to understand how proteins fold clearly. Here we investigate the rate of intra-molecular contact formation in short two-dimensional compact polymer chains by calculating the probability distribution p(r) of end-to-end distance r using the enumeration calculation method and HP model on two-dimensional square lattice. The probability distribution of end-to-end distance p(r) of short two-dimensional compact polymers chains may consist of two parts, i.e. p(r) = p1(r) p2(r), where p1(r) and p2(r) are different for small r. The rate of contact formation decreases monotonically with the number of bonds N, and the rate approximately conforms to the scaling relation of k(N) ∝ N-α. Here the value of α increases with the contact radius a and it also depends on the percentage of H (hydrophobic) residues in the sequences of compact chains and the energy parameters of εHH, εHP and εPP . Some comparisons of theoretical predictions with experimental results are also made. This investigation may help us to understand the protein folding.     

Purification, characterization, kinetic properties, and thermal behavior of extracellular polygalacturonase produced by filamentous fungus Tetracoccosporium sp

For the first time, a polygalacturonase from the culture broth of Tetracoccosporium sp. was isolated and incubated at 30°C in an orbital shaker at 160 rpm for 48h. The enzyme was purified by ammonium sulfate precipitation and two-step ion-exchange chromatography and had an apparent molecular mass of 36 kDa, as shown by sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis. Its optimum activity was at pH 4.3 and 40°C, and the K _m and V _max values of this enzyme (for polygalacturonic acid) were 3.23 mg/mL and 0.15 μmol/min, respectively. Ag⁺, Co²⁺, EDTA, Tween-20, Tween-80, and Triton X-100 stimulated polygalacturonase activity whereas Al³⁺, Ba²⁺, Ca²⁺, Fe²⁺, Fe³⁺, Ni²⁺, Mg²⁺, Mn²⁺, and SDS inhibited it. In addition, iodoacetamide and iodoacetic acid did not inhibit enzyme activity at a concentration of 1 mM, indicating that cysteine residues are not part of the catalytic site of polygalacturonase. We studied the kinetic properties and thermal inactivation of polygalacturonase. This enzyme exhibited a t _1/2 of 63 min at 60°C and its specific activity, turnover number, and catalytic efficiency were 6.17 U/mg, 113.64 min⁻¹, and 35.18 mL/(min·mg), respectively. The activation energy (ΔE ^#) for heat inactivation was 5.341 kJ/mol, and the thermodynamic activation parameters ΔG ^#, ΔH ^#, and ΔS ^# were also calculated, revealing a potential application for the industry.     

Local effects of atomizing analyte droplets on the plasma parameters of the inductively coupled plasma

Monodisperse droplets from aqueous analyte solutions with selected diameters in the range 35–67 µm are introduced into an inductively coupled plasma with frequencies between 1 to 10 droplets per second. The effect of desolvation and atomization in the ICP is studied end-on by optical emission spectroscopy employing simultaneously up to three calibrated monochromators with fast photomultipliers. The onsets of desolvation and analyte atomization and the extremely fast diffusion of hydrogen in the ICP and its effect on the plasma are studied by simultaneous measurements of hydrogen, analyte and Ar lines. The local cooling by analyte atomization as well as the recovering of the plasma excitation temperature after completed atomization is measured quantitatively in dependence on time applying the Boltzmann plot method to simultaneously recorded line intensities of atomized analyte atoms which act as plasma probes. Furthermore, it is shown that relatively small differences in analyte mass cause significant temperature changes during atomization and, as consequence, strong variations of the emission intensity of analyte lines during atomization if measured by end-on observation.     

甲基丙烯酸N,N-二甲氨基乙酯与丙烯酰β-环糊精共聚水凝胶的合成及其性能研究

用不同的方法合成了两种结构不同的丙烯酰 β 环糊精酯 (β CD 3 A和 β CD 6 A) ,以此为单体与甲基丙烯酸N ,N 二甲氨基乙酯 (DMAEMA)通过氧化还原自由基引发聚合 ,合成出两类含 β 环糊精结构单元的新型水凝胶 .用核磁共振 ,红外光谱及元素分析对两种单体及共聚物的结构和组成进行了表征 .溶胀实验结果表明 ,两类水凝胶均具有较好的pH、温度及离子强度敏感性 ,且因其交联网络结构不同 ,其溶胀性能有所差异     

Improvement of plant parameters of the ROBO gamma irradiation facility due to design modification

Two industrial scale, “ROBO” type ⁶⁰Co gamma irradiation facilities have recently been put into operation in Syria and Peru, and the dosimetry commissioning of both plants have been carried out to determine dose distribution within products and to calculate plant parameters such as efficiency, dose uniformity ratio and throughput. There are some design modifications between the two plants in connection with the location of the carriers with respect to the source plaque and also to each other. The effect of these construction modifications on the plant parameters is discussed in the analysis of the dose distribution data measured in the carriers with depth and height among the four irradiation rows on both sides of the source plaque. The plant parameters were also calculated for different product densities using the technical data of the facilities, and the calculated and measured results were compared to each other.     

取代基物化参数及其在药物定量构效关系中的应用

把取代基电性、立体及疏水性物化参数组合建立一种新取代基描述方法, 对环尿素类和N,N-二甲基-2-溴苯乙胺类衍生物进行结构表征. 对训练样本集通过逐步回归筛选变量, 所建多元线性回归方程R2分别为0.853和0.960, 留一法交互检验Rcv2分别为0.723和0.901；用预测集样本作外部预测, 所得Qext2分别为0.7617和0.7653. 结果显示：环尿素类化合物结构中苯环邻位立体、间位疏水、对位疏水及立体因素对该类药物抗HIV活性产生阻抑作用； N,N-二甲基-2-溴苯乙胺类苯环上取代基立体因素及对位给电子效应有利于提高肾上腺素能阻断活性.     

Liquefaction of corn stover and preparation of polyester from the liquefied polyol

This research investigated a novel process to prepare polyester from corn stover through liquefaction and crosslinking processes. First, corn stover was liquefied in organic solvents (90 wt% ethylene glycol and 10 wt% ethylene carbonate) with catalysts at moderate temperature under atmospheric pressure. The effect of liquefaction temperature, biomass content, and type of catalyst, such H₂SO₄, HCl, H₃PO₄, and ZnCl₂, was evaluated. Higher liquefaction yield was achieved in 2 wt% sulfuric acid, 1/4 (w/w) stover to liquefying reagent ratio; 160°C temperature, in 2h. The liquefied corn stover was rich in polyols, which can be directly used as feedstock for making polymers without further separation or purification. Second, polyester was made from the liquefied corn stover by crosslinking with multifunctional carboxylic acids and/or cyclic acid anhydrides. The tensile strength of polyester is about 5 MPa and the elongation is around 35%. The polyester is stable in cold water and organic solvents and readily biodegradable as indicated by 82% weight loss when buried in damp soil for 10 mo. The results indicate that this novel polyester could be used for the biodegradable garden mulch film production.     

Speciation of phytate ion in aqueous solution. Cadmium(II) interactions in aqueous NaCl at different ionic strengths

Interactions between myo-inositol 1,2,3,4,5,6-hexakis(dihydrogen phosphate) (phytic acid) and cadmium(II) were studied by using potentiometry (at 25 °C with the ISE-H⁺ glass electrode) in different metal to ligand (Phy) ratios (1:1≤Cd²⁺:Phy≤4:1) in NaCl_aq at different ionic strengths (0.1≤I/mol L⁻¹≤1). Nine Cd_iH_jPhy^{(12−2i−j)−} species are formed with i=1 and 2 and 4≤j≤7; and trinuclear Cd₃H₄Phy²⁻. Dependence of complex formation constants on ionic strength was modeled by using Specific ion Interaction Theory (SIT) equations. Phytate and cadmium speciation are also dependent on the metal to ligand ratio. Stability of Cd_iH_jPhy^{(12−2i−j)−} species was modeled as a function of both the ligand protonation step (j) and the number of metal cations bound to phytate (i), and relationships found were used for the prediction of species other than those experimentally determined (mainly di- and tri-protonated complexes), allowing the possibility of modeling Phy and Cd(II) behavior in natural waters and biological fluids. A critical evaluation of phytate sequestering ability toward cadmium(II) has been made under several experimental conditions, and the determination of an empirical parameter has been proposed for an objective “quantification” of this ability. A thorough analysis of literature data on phytate–cadmium(II) complexes has been performed. Previous contributions to this series: [1–8]     

STUDY ON THE PROPERTIES OF BLEND OF NATURAL RUBBER LATEX/METHYL METHACRYLATE GRAFTED RUBBER LATEX BY GAMMA RADIATION

Natural rubber latex(NRL)and methyl methacrylate(MMA)grafted rubber latex were blended in different ratios and irradiated at various absorbed doses by gamma rays from Co-60 source at room temperature.The tensile properties, swelling ratio and permanent set were measured.The maximum tensile strength and modulus at 500% elongation were obtained at an absorbed dose of 8 kGy.Modulus increases from 6.99 MPa to 9.87 MPa for an increase in proportion of MMA grafted rubber from 40% to 60% in the blend at similar absorbed dose.Elongation at break and swelling ratio decrease with increasing absorbed dose as well as the MMA grafted rubber content in the blends.The decreasing trend of permanent set is high up to 5 kGy absorbed dose,and beyond that dose,it becomes almost flat.